CLICK HERE TO SEE MORE TWO RAM BALERS FOR SALE

2010_0627craftever0033-1 2010_0627craftever0013-1
2010_0627craftever0015-1 2010_0627craftever0016-1
2010_0627craftever0017-1 2010_0627craftever0018-1
2010_0627craftever0019-1 2010_0627craftever0020-1
2010_0627craftever0021-1 2010_0627craftever0022-1
2010_0627craftever0024-1 2010_0627craftever0026-1
2010_0627craftever0027-1 2010_0627craftever0029-12
2010_0627craftever0030-1 2010_0627craftever0032-1
2010_0627craftever0033-1 2010_0627craftever0031-1

 

Marathon Model TR-10/75 Used 2-Ram Baler


Dimensional
Structure Length ...............................................................25'-2"
Structure Width .................................................................14'-6"
Body Height.......................................................................55"


Standard Hopper:

Hopper Opening................................................................40" Wide X 80" Long
Charge Box Opening.........................................................40 1/4" Wide X 70" Long

Hopper Height (to top of hopper from the ground) ...........88"
Approximate Baler Weight..............................................24 Tons

Operating Forces
Cylinder Force Ram Face Pressure
Main Ram .........................10" Bore 7" Rod .........................235,600 Lbs .......................199 PSI
Eject Ram .....................8" Bore, 4 1/2" Rod .........................150,800 Lbs .........................98 PSI
Hydraulics
Maximum System Pressure ..............................................3000 PSI
Main Cylinder Stroke.........................................................96"
Ejection Cylinder Stroke....................................................68"
Main Pump Flow ...............................................................150 GPM
Reservoir Capacity............................................................400 Gallons
Filtration ............................................................................10 Micron
Tier Flow ...........................................................................12 GPM
Oil Cooler ..........................................................................Air To Oil
Oil Cooler Fan Motor.........................................................1 HP
Electrical
Main Control Panel............................................................UL Listed
Main Motor ........................................................................75 HP
Main Voltage......................................................................460 VAC, 3 Phase
Programmable Controller..................................................GE standard. Permits automatic or manual
control. Includes operator keypad, programmable
baling modes and plain English diagnostic
readout.
Control voltage ..................................................................120 VAC
Two Ram Balers Are Shipped Without Oil
Standard Features
Computer diagnostics and Modem
Abrasion-resistant, replaceable liners throughout the chamber
Tongue and groove Floor
Jam-free relief system
U.S. Wire 342 wire tier
Electrical disconnect
Upper and lower photocell
Hopper with view door
Bale table
High-efficiency power unit with multi-stage pump
Body shear bar is serrated, angled, and replaceable
Ram shear bar is replaceable and reversible
Available Options
Reduced voltage starting
Oil heaters
Dual RamPro bale retainer
Bale separation door
Cranston strapper (may be removed for shipping)
Performance Ratings
Typical Expanded Bale ...............................................31" x 45" x 64" (787mm x 1143mm x 1626mm)
Cycle Time ..................................................................14 seconds

This machine is still in Operation at a customer location near Philadelphia PA-Can see run. Customer is upgrading to a larger machine.

 
Recycling Equipment Corporation
831 West Fifth Street, Lansdale, PA 19446
Phone: 267-218-7200  Fax: 267-218-7215

Click here or Call us for more info on this Machine